Igc 2 additional important questions

Igc 2 additional important questions

Outline the factors to be considered before the machine is put into use Answer plan Issue of a declaration of conformity to the applicable standard such as European union CE mark The suitability of the machine for the task Location and environment The completion of training for employees and supervisions The commissioning and the provision of a practical demonstration by the machine suppliers The correct sitting of the machine with regard to its stability The level of lightning and the space provided for operation and for carrying out maintenance Ensuring that protective devices were in place for dangerous parts of machine and That controls were properly labelled and were tested ensure they functioned correctly.

There must be suitable means of access such as scaffolding, ladders and crawling boards. Special provision should be made for the disabled.

nebosh igc 2 questions and answers 2017 pdf

Identify the sources of information available in Material Safety Data Sheet. PPE can be used to prevent contamination of clothing e. They should be allowed to cool sufficiently.

nebosh igc 2 important questions and answers pdf

Periodically the risk control measures should be reviewed. Adequate supply of cold drinking water is essential to avoid dehydration.

Nebosh igc 1 questions and answers 2017 pdf

Information includes such items as signs, posters, systems of work and general health and safety arrangements. It will be necessary to provide protective leather or fi re resistant aprons and gloves, and appropriate eye and face protection such as eye visors. Eating facilities should be provided so that food can be eaten in a hygienic environment. This usually requires separate secure storage for each type of waste and the clear identification of types. Outline the factors to be considered before the machine is put into use Answer plan Issue of a declaration of conformity to the applicable standard such as European union CE mark The suitability of the machine for the task Location and environment The completion of training for employees and supervisions The commissioning and the provision of a practical demonstration by the machine suppliers The correct sitting of the machine with regard to its stability The level of lightning and the space provided for operation and for carrying out maintenance Ensuring that protective devices were in place for dangerous parts of machine and That controls were properly labelled and were tested ensure they functioned correctly. Heat exhaustion due to high ambient temperature 2. Other PPE to be used can be eye googles and coveralls. Separate storage for dirty work clothing may be necessary to prevent cross-contamination. Finally, special control requirements are needed for carcinogens.

Other PPE to be used can be eye googles and coveralls. While the atmosphere-supplying type of respirator must be used in some paint spraying operations, particularly with urethane paints or when painting in a confined space e.

Igc 2 notes pdf

Showers may be necessary if the work is dirty, strenuous or involves potential contamination with hazardous substances. A worker is engaged in general cleaning a large veterinary Clinic. The load must also be carefully considered during the assessment it may be too heavy. Preparation often involves sanding of the surface which creates a health hazard if dust masks are not worn. Spill trays may be used in laboratories, whilst uncontrolled releases of, for example, body fluids such as blood may be treated with a chemical to contain and disinfect. Check to make use you have the correct barrier cream for the chemicals being used. A5 Possible effects on health from exposure to high levels of noise include:both permanent and chronic effects noise induced hearing loss caused by damage to the hair cells of the inner ear with reduced hearing capacity at particular frequencies tinnitus and temporary effects such as temporary threshold shift, acute tinnitus, stress and fatigue. If ventilation is to be used, it must reduce the exposure level for employees to below the workplace exposure limit. Identify factors in relation to the load that will affect the risk of injury? Personal protective equipment PPE should only be used as a last resort. Adequately securing the waste might control this risk, but emergency spill or release plans may also be required, along with the necessary personnel, equipment and training to put these plans into effect see Topic Focus. These should be adequately lit, clean and ventilated, with separate facilities for men and women.

If hot food is not provided at work then basic facilities might be provided so workers can make their own hot drinks and food. Washing facilities should have hot and cold or warm running water, soap and towels or other means of drying.

Rated 8/10 based on 6 review
Download
NEBOSH IGC MATERIAL : Nebosh IGC 2 "CONTROL OF INTERNATIONAL WORKPLACE HAZARDS"